Customers compare BWTS20040C to these similar products
Products Featured in this Video
Hi everyone. Aiden here with etrailer. Today we're going to be taking a look at these B and W Tow and Stow Dual Ball Mounts. This is going to be for your two and a half inch hitches and be completely adjustable, offering two different ball sizes to hook up to your various trailer and truck combinations. So if you're someone that tows a wide variety of different trailers, maybe some with… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Bill, thanks for reaching out! It sounds like you're needing something like the Scissor Stabilizer Jacks w/ Handle #TJSCHD-24. This has a few different holes for the mounting hardware so it should be able to match up with the bolt…
view full answer...Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount.…
view full answer...In regards to the B&W Tow & Stow 3-Ball Mount part #BWTS10048B for 5" or part #BWTS10049B for 7", the distance from the top of the shank to the bottom of the upright while the hitch balls are stowed…
view full answer...The B&W Tow & Stow 2-Ball Mount - 2.5" Hitch item #BWTS20037B does not have a maximum tongue weight. The 2-5/16" hitch ball has a 18,000 lbs capacity and the 2" hitch ball has a 7,500 lbs capacity.…
view full answer...I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by…
view full answer...I have a solution for you, but there is not an adapter that will allow you to mount the B&W Biker Bar #BWMC2301 to an e-track setup on a trailer. The Biker Bar does come with mounting plates/anchors that are mounted on the underside of your…
view full answer...B&W makes their Biker Bar motorcycle transport systems, such as #BWMC2301, just for hogs but we do have other setups for cruiser and touring motorcycle transport that are general-purpose products. You can see all of these wheel shock products…
view full answer...Measuring on the ground to the inside point of contact of each tire is the correct way to determine which chock setup you need. Yours being 16 inches at the closest point would most likely fall within the 16 to 24 inch range of the #FA84-00-4840.
view full answer...For the 2-1/2 inch hitch size B and W only makes the one size drop for the Tow and Stow Ball Mount for the GM MultiPro Tailgate with the part #BWTS20066BMP that you referenced. This is a very specific application so B and W decided to go with a…
view full answer...We have exactly what you are looking for. You will need the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 14.5K #BWTS20067BMP which has the 1-7/8" hitch ball with a 3500lb trailer…
view full answer...For your 2022 Chevrolet Silverado 2500HD with the Multi-Flex tailgate B&W has a line of hitches that were specifically designed for your tail gate in mind. B&W Tow & Stow 2-Ball Mount #BWTS20066BMP B&W Tow &…
view full answer...Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…
view full answer...